 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document MHPM7B12A120A by MHPM7B12A120A/D Hybrid Power Module Integrated Power Stage for 2.0 hp Motor Drives (This device is not recommended for new designs) (This device is replaced by MHPM7A10S120DC3) This module integrates a 3-phase input rectifier bridge, 3-phase output inverter and brake transistor/diode in a single convenient package. The output inverter utilizes advanced insulated gate bipolar transistors (IGBT) matched with free-wheeling diodes to give optimal dynamic performance. It has been configured for use as a three-phase motor drive module or for many other power switching applications. The top connector pins have been designed for easy interfacing to the user's control board. * Short Circuit Rated 10 s @ 25C, 600V * Pin-to-Baseplate Isolation Exceeds 2500 Vac (rms) * Convenient Package Outline Recognized * UL * Access to Positive and Negative DC Bus * Visit our website at http://www.mot-sps.com/tsg/ MHPM7B12A120A 12 AMP, 1200 VOLT HYBRID POWER MODULE PLASTIC PACKAGE CASE 440-02, Style 1 MAXIMUM DEVICE RATINGS (TJ = 25C unless otherwise noted) Rating INPUT RECTIFIER BRIDGE Peak Repetitive Reverse Voltage (TJ = 125C) Average Output Rectified Current Peak Non-repetitive Surge Current (1/2 cycle )(1) OUTPUT INVERTER IGBT Reverse Voltage Gate-Emitter Voltage Continuous IGBT Collector Current Peak Repetitive IGBT Collector Current(2) Continuous Free-Wheeling Diode Current Peak Repetitive Free-Wheeling Diode Current(2) IGBT Power Dissipation per die (TC = 95C) Free-Wheeling Diode Power Dissipation per die (TC = 95C) Junction Temperature Range Short Circuit Duration (VCE = 600V, TJ = 25C) (1) 1 cycle = 50 or 60 Hz (2) 1 ms = 1.0% duty cycle VCES VGES ICmax IC(pk) IFmax IF(pk) PD PD TJ tsc 1200 20 12 24 12 24 60 40 - 40 to +125 10 V V A A A A W W C s VRRM IO IFSM 1200 12 200 V A A Symbol Value Unit REV 2 (c) Motorola IGBT Device Motorola, Inc. 1998 Data 1 MHPM7B12A120A MAXIMUM DEVICE RATINGS (continued) (TJ = 25C unless otherwise noted) Rating BRAKE CIRCUIT IGBT Reverse Voltage Gate-Emitter Voltage Continuous IGBT Collector Current Peak Repetitive IGBT Collector Current(2) IGBT Power Dissipation (TC = 95C) Peak Repetitive Output Diode Reverse Voltage (TJ = 125C) Continuous Output Diode Current Peak Output Diode Current TOTAL MODULE Isolation Voltage (47-63 Hz, 1.0 Minute Duration) Operating Case Temperature Range Storage Temperature Range Mounting Torque VISO TC Tstg - 2500 - 40 to + 90 - 40 to +125 6.0 Vac C C lb-in VCES VGES ICmax IC(pk) PD VRRM IFmax IF(pk) 1200 20 12 24 60 1200 12 24 V V A A W V A A Symbol Value Unit ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Characteristic INPUT RECTIFIER BRIDGE Reverse Leakage Current (VRRM = 1200 V) Forward Voltage (IF = 12 A) Thermal Resistance (Each Die) OUTPUT INVERTER Gate-Emitter Leakage Current (VCE = 0 V, VGE = 20 V) Collector-Emitter Leakage Current (VCE = 1200 V, VGE = 0 V) TJ = 25C TJ = 125C Gate-Emitter Threshold Voltage (VCE = VGE, IC = 1.0 mA) Collector-Emitter Breakdown Voltage (IC = 10 mA, VGE = 0) Collector-Emitter Saturation Voltage (IC = 12 A, VGE = 15 V) Input Capacitance (VGE = 0 V, VCE = 10 V, f = 1.0 MHz) Input Gate Charge (VCE = 600 V, IC = 12 A, VGE = 15 V) Fall Time - Inductive Load (VCE = 600 V, IC = 12 A, VGE = 15 V, RG(off) = 20 ) Turn-On Energy (VCE = 600 V, IC = 12 A, VGE = 15 V, RG(on) = 220 ) Turn-Off Energy (VCE = 600 V, IC = 12 A, VGE = 15 V, RG(off) = 20 ) Free Wheeling Diode Forward Voltage (IF = 12 A, VGE = 0 V) Free Wheeling Diode Reverse Recovery Time (IF = 12 A, V = 600 V, di/dt = 100 A/s) Free Wheeling Diode Stored Charge (IF = 12 A, V = 600 V, di/dt = 100 A/s) Thermal Resistance - IGBT (Each Die) Thermal Resistance - Free-Wheeling Diode (Each Die) (2) 1.0 ms = 1.0% duty cycle IGES ICES - - VGE(th) V(BR)CES VCE(SAT) Cies QT tf Eon Eoff VF trr Qrr RJC RJC 4.0 1200 - - - - - - - - - - - 6.0 2000 6.0 - 2.4 1840 66 300 - - 1.6 170 575 - - 100 8.0 - 3.5 - - 500 2.0 2.0 2.2 200 900 1.7 2.7 V V V pF nC ns mJ mJ V ns nC C/W C/W - - 20 A A IR VF RJC - - - 5.0 2.1 - 50 2.65 2.9 A V C/W Symbol Min Typ Max Unit 2 Motorola IGBT Device Data MHPM7B12A120A ELECTRICAL CHARACTERISTICS (continued) (TJ = 25C unless otherwise noted) Characteristic BRAKE CIRCUIT Gate-Emitter Leakage Current (VCE = 0 V, VGE = 20 V) Collector-Emitter Leakage Current (VCE = 1200 V, VGE = 0 V) TJ = 25C TJ = 125C Gate-Emitter Threshold Voltage (VCE = VGE, IC = 10 mA) Collector-Emitter Breakdown Voltage (IC = 10 mA, VGE = 0) Collector-Emitter Saturation Voltage (VGE = 15 V, IC = 12 A) Input Capacitance (VGE = 0 V, VCE = 10 V, f = 1.0 MHz) Input Gate Charge (VCE = 600 V, IC = 12 A, VGE = 15 V) Fall Time - Inductive Load (VCE = 600 V, IC = 12 A, VGE = 15 V, RG(off) = 20 ) Turn-On Energy (VCE = 600 V, IC = 12 A, VGE = 15 V, RG(on) = 220 ) Turn-Off Energy (VCE = 600 V, IC = 12 A, VGE = 15 V, RG(off) = 20 ) Output Diode Forward Voltage (IF = 12 A) Output Diode Reverse Leakage Current Thermal Resistance - IGBT Thermal Resistance - Output Diode IGES ICES - - VGE(th) V(BR)CES VCE(SAT) Cies QT tf Eon Eoff VF IR RJC RJC 4.0 1200 - - - - - - - - - - 6.0 2000 6.0 - 2.4 1840 66 300 - - 1.6 - - - 100 8.0 - 3.5 - - 500 2.0 2.0 2.2 50 1.7 2.7 V V V pF nC ns mJ mJ V A C/W C/W - - 20 A A Symbol Min Typ Max Unit Motorola IGBT Device Data 3 MHPM7B12A120A Typical Characteristics 24 IF, FORWARD CURRENT (AMPS) IF, FORWARD CURRENT (AMPS) 20 16 12 8 4 0 0 0.4 0.8 1.2 1.6 2.0 2.4 VF, FORWARD VOLTAGE (VOLTS) 2.8 3.2 TJ = 125C 25C 24 20 16 12 TJ = 125C 8 25C 4 0 0 0.3 0.6 0.9 1.2 1.5 1.8 VF, FORWARD VOLTAGE (VOLTS) 2.1 2.4 Figure 1. Forward Characteristics - Input Rectifier Figure 2. Forward Characteristics - Free-Wheeling Diode 24 TJ = 25C IC, COLLECTOR CURRENT (AMPS) 20 16 12 8 4 0 9V 0 2 3 4 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 1 5 VGE = 18 V 15 V IC, COLLECTOR CURRENT (AMPS) 12 V 24 TJ = 125C 20 16 12 8 9V 4 0 15 V VGE = 18 V 12 V 0 1 2 3 4 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 5 Figure 3. Forward Characteristics, TJ = 25C Figure 4. Forward Characteristics, TJ = 125C VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 20 18 16 14 12 10 8 6 4 2 0 8 IC = 6 A 10 12 14 16 18 20 12 A 24 A TJ = 25C VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 900 800 700 600 500 400 300 200 100 0 0 10 20 30 40 50 60 Qg, TOTAL GATE CHARGE (nC) 400 V VCE = 600 V 500 V VCE = 400 V 600 V IC = 12 A TJ = 25C 500 V 18 16 14 12 10 8 6 4 2 0 70 VGE, GATE-EMITTER VOLTAGE (VOLTS) VGE, GATE-EMITTER VOLTAGE (VOLTS) Figure 5. Collector-Emitter Voltage versus Gate-Emitter Voltage Figure 6. Collector-Emitter and Gate-Emitter Voltages versus Total Gate Charge 4 Motorola IGBT Device Data MHPM7B12A120A Typical Characteristics 1000 toff tf 10000 VCE = 600 V VGE = 15 V RG(off) = 20 TJ = 125C t, TIME (ns) 1000 t, TIME (ns) 100 td(off) tf toff VCE = 600 V VGE = 15 V RG(off) = 20 TJ = 25C 10 0 5 10 15 20 25 30 100 0 5 10 15 20 IC, COLLECTOR CURRENT (AMPS) 25 IC, COLLECTOR CURRENT (AMPS) td(off) 30 Figure 7. Inductive Switching Times versus Collector Current, TJ = 25C Figure 8. Inductive Switching Times versus Collector Current, TJ = 125C 10000 VCE = 600 V VGE = 15 V IC = 12 A TJ = 25C t, TIME (ns) t, TIME (ns) toff td(off) 10000 VCE = 600 V VGE = 15 V IC = 12 A TJ = 125C toff 1000 td(off) 1000 tf 100 10 100 RG(off), GATE RESISTANCE (OHMS) 1000 100 10 tf 100 RG(off), GATE RESISTANCE (OHMS) 1000 Figure 9. Inductive Switching Times versus Gate Resistance, TJ = 25C Figure 10. Inductive Switching Times versus Gate Resistance, TJ = 125C 120 110 100 90 t, TIME (ns) 80 70 60 50 40 30 20 10 0 tr 25C VCE = 600 V VGE = 15 V RG(on) = 220 TJ = 125C t, TIME (ns) 10000 VCE = 600 V VGE = 15 V IC = 12 A 1000 25C TJ = 125C 100 tr 10 0 2 4 8 10 12 14 16 18 IC, COLLECTOR CURRENT (AMPS) 6 20 22 24 10 100 RG(on), GATE RESISTANCE () 1000 Figure 11. Inductive Switching Times versus Collector Current Figure 12. Inductive Switching Times versus Gate Resistance Motorola IGBT Device Data 5 MHPM7B12A120A Typical Characteristics 10000 E off , TURN-OFF ENERGY LOSSES (J) VCE = 600 V VGE = 15 V RG(off) = 20 TJ = 125C 10000 E off , TURN-OFF ENERGY LOSSES (J) TJ = 125C 1000 25C 1000 25C VCE = 600 V VGE = 15 V IC = 12 A 100 10 100 RG(off), GATE RESISTANCE (OHMS) 1000 100 0 5 10 15 20 IC, COLLECTOR CURRENT (AMPS) 25 30 Figure 13. Turn-Off Energy Losses versus Collector Current Figure 14. Turn-Off Energy Losses versus Gate Resistance I rr , PEAK REVERSE RECOVERY CURRENT (AMPS) t rr , REVERSE RECOVERY TIME (ns) 1000 TJ = 125C 25C C, CAPACITANCE (pF) trr 100 10000 Cies 1000 TJ = 125C 10 Irr 25C Coes 100 Cres 1 0 5 -di/dt = 100 A/s 10 15 20 IF, FORWARD CURRENT (AMPS) 25 30 10 0 20 40 60 80 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 100 Figure 15. Reverse Recovery Characteristics - Free-Wheeling Diode Figure 16. Capacitance Variation r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 40 IC, COLLECTOR CURRENT (AMPS) 1.0 IGBT DIODE 0.1 30 20 0.01 10 0 +VGE = 15 V -VGE = 0 V RG(on) = 220 TJ = 25C 0 600 800 200 400 1000 1200 1400 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 1600 0.001 1.0 10 t, TIME (ms) 100 1000 Figure 17. Reversed Biased Safe Operating Area (RBSOA) Figure 18. Thermal Response 6 Motorola IGBT Device Data MHPM7B12A120A ton td(on) OUTPUT, Vout INVERTED 10% 90% VCE INPUT, Vin 50% 10% PULSE WIDTH 50% tr 90% td(off) 90% toff tf IC RG L VCE Figure 19. Inductive Switching Time Test Circuit and Timing Chart Motorola IGBT Device Data 7 MHPM7B12A120A 8 1 P1 P2 7 Q1 Q3 Q5 9 G1 E1 D8 8 10 D10 D12 D7 12 U V W Q2 16 D2 G7 G2 G4 17 D4 G6 Q4 14 D6 Q6 20 19 18 G3 E3 G5 E5 D1 11 13 D3 D5 B 21 Q7 15 D9 D11 D13 N1 25 6 NC NC = PIN NUMBER IDENTIFICATION NC NC 4 5 2 3 These pins are physical terminations but not connected internally. DEVICE INTEGRATION N2 3-Phase Input Rectifier Bridge Brake IGBT/ Diode 3-Phase Output IGBT/Diode Bridge 24 R 23 S Figure 20. Integrated Power Stage Schematic 22 T Motorola IGBT Device Data MHPM7B12A120A PACKAGE DIMENSIONS E C K AB AC AD AE AF 3 PL AA 9 PL A Q N 1 AH G 2 PL 17 2 PL V L M S R B DETAIL Z Y 4 PL 25 18 AG P U X 4 PL T NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. LEAD LOCATION DIMENSIONS (ie: M, G. AA...) ARE TO THE CENTER OF THE LEAD. H 7 PL J 25 PL DIM A B C D E F G H J K L M N P Q R S T U V X Y AA AB AC AD AE AF AG AH D F DETAIL Z MILLIMETERS MIN MAX 97.54 98.55 52.45 53.47 14.60 15.88 0.43 0.84 10.80 12.06 0.94 1.35 1.60 2.21 8.58 9.19 0.30 0.71 18.80 20.57 19.30 20.32 38.99 40.26 9.78 11.05 82.55 83.57 4.01 4.62 26.42 27.43 12.06 12.95 4.32 5.33 86.36 87.38 14.22 15.24 6.55 7.16 2.49 3.10 2.24 2.84 7.32 7.92 4.78 5.38 8.58 9.19 6.05 6.65 4.78 5.38 69.34 70.36 --- 5.08 INCHES MIN MAX 3.840 3.880 2.065 2.105 0.575 0.625 0.017 0.033 0.425 0.475 0.037 0.053 0.063 0.087 0.338 0.362 0.012 0.028 0.74 0.81 0.760 0.800 1.535 1.585 0.385 0.435 3.250 3.290 0.158 0.182 1.040 1.080 0.475 0.515 0.170 0.210 3.400 3.440 0.560 0.600 0.258 0.282 0.098 0.122 0.088 0.112 0.288 0.312 0.188 0.212 0.338 0.362 0.238 0.262 0.188 0.212 2.730 2.770 --- 0.200 CASE 440-02 ISSUE A Motorola IGBT Device Data 9 MHPM7B12A120A Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shagawa-ku, Tokyo, Japan. 03-5487-8488 10 Motorola MHPM7B12A120A/D IGBT Device Data |
Price & Availability of MHPM7B12A120AD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |